UPVC Window Handle ReplacementReplacing a broken window handle is a easy task and with the right tools it can be accomplished quite quickly. However, it is essential to know your type of handle and the spindle's length prior buying a replacement.
Older uPVC windows feature handles with cockspurs, which have spurs that protrude to secure a wedge-shaped cockspur striker plate. They can be right or left-handed and have to be matched when replacing.
What type of lock or handle do I have
There are many different types of window handles made of upvc and locks, each having their own benefits and purposes. The type of handle you have will determine whether or not your locking mechanism is effective and
UPVC Window Handle Replacement if it's easy to open windows. Over time, and with regular use the handles made of upvc on your windows could become damaged and worn out. This makes them less secure and effective. In some instances they might even disappear completely. If you find that your window handles have been removed, it's important to repair them as quickly as possible. This will stop possible burglaries, and keep your house secure.
It's a task that almost anyone can do. You will need a few tools, but with proper knowledge, it's an easy task that will take only a couple of minutes. To get started you must determine the type of lock and handle you have on your window and then to find the ideal replacement.
Inline Espagnolette Handles
These are the most common type of upvc handle and are typically located on the side of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles come with an elongated spindle that runs through middle of the handle into the window frame to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles have a single screw that secures the handle to the frame and aren't as secure as other kinds of window handles.
Handles that tilt and turn
In contrast to other handles made of upvc the tilt and turn handles can both be rotated to open the window and turned inwards to allow for ventilation. Generally, they have a 7mm spindle on the side of the handle. They are available in both left and
UPVC Window Handle Replacement right-handed versions.
It is important to measure the spindle size when buying replacement upvc handle. Not all are exactly the same size. To determine the length of your upvc handle, simply drop something in the middle of the hole, and then measure how far it extends before meeting an obstruction. This is the maximum spindle length that will fit in your window.
What is the spindle?
uPVC window handles operate similarly like doors. By turning the handle, you can operate a latch within the frame. This unlocks the window to allow it to be closed and opened. However, sometimes handles can be damaged, especially if they are regularly used or exposed to extreme weather conditions. You may have to replace the handles on your uPVC window if they are not able to operate it properly.
There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism fitted to the window. It is important to identify the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.
The base section of the handle will tell the type of uPVC it is. A snap-in cover is over the screw that holds the base of the handle in position. After removing this you will be able to see the screw that holds the base of the handle in position. After both screws are removed you should be in a position to pull the handle away from the
upvc window handle replacement window.
After taking off the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle since you will need to ensure that you purchase a replacement that has the same length as your original handle and locking mechanism.
The most common issue with window handle problems with uPVC is that the spindle gets worn-out and is unable to longer function properly with the locking mechanism. This could be due to damage caused by constant use, a loosening of the locking mechanism, or even corrosion that occurs over time. If this occurs, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.
How do I take off the old handle?
Over time and through everyday usage, window handles could be damaged or destroyed, and if this happens, it is crucial to repair them as soon as you can to ensure the safety of your home. It is easy to replace a damaged or worn handle. The job can be completed in under an hour without the need of special tools.
The first step in removing the handle that was previously used is to remove the screw that is located on the top of the base of the handle. Once the screw is removed, the handle will be pulled away. There is a second screw that is located at the bottom of the handle base, and it can be removed too. Once both of these screws are removed, the handle can be removed completely from the base portion of the window.
After removing the old handle and fixing holes, align the holes of the new handle to the holes already present in the window frame. If there is a sticker or cap on the new handle, take it off it if required and put the handle back in the appropriate position. Once the handle is set, it is essential to check that it works by turning the handle, and ensuring that the lock mechanism activates.
Espag handles come with spindles that extend out of the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows have a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom bar crossmember.
After you have installed the new handle, slide the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle has been firmly fixed. When the handle is in use, open and close the window a couple of times to make sure it is working properly and securely.
How do I put in the new handle?
The process of changing your window handle made of uPVC isn't difficult and the process is simple. All you require is a screwdriver, and a small amount of patience. The first step is make sure that the handle is in the unlocked position and then take out any screws that are visible, you can also replace these by screw caps if you need. After removing the handle, you will need to note the length of the spindle that extends from the back. This is vital because it will determine the kind of handle you will need to purchase.
Espagnolette handles made of uPVC are the most well-known type of handle. They have a spindle that runs through the handle, and is responsible for an internal locking mechanism within the frame of the window. When the handle is turned it releases the latch on the window, allowing it to open. With time and regular use, espagnolette handles could become damaged or impaired, making it necessary to find a
replacement windows prices.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. They can be replaced using the same method as you would for espagnolette handles however, ensure that the new handle is not angled and flat.
