Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA-certified system is safe from hacking, key cloning, and also vehicle immobiliser bypass.
The system is hidden within the wiring loom of your vehicle, so it's completely invisible to anyone looking. It works by creating an e-pin code push sequence that is pushed through buttons already on the steering wheel, door cards and centre console.
No circuit cuts
A car is a prized asset that you put in years of hard work to acquire, so it's understandable why car owners would want to secure their vehicle against theft. However, traditional security devices such as wheel locks and alarms can easily be snatched away or taken over by thieves. Ghost immobilisers are a highly-effective solution that operates silently and isn't easily recognized by modern day thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU by using buttons on the steering wheel, dash, and door panels to generate an individual pin code that only you are aware of. The code can be altered at any time and can contain up to 20 digits based on your preferences. It also comes with a secure emergency code you can use should you forget your PIN.
The ghost immobiliser could also be used to stop relay boxes from transferring the signal of your car's key from within your home, which would open the doors and begin the vehicle. It could even block advanced methods of stealing your vehicle, such as OBD port hacking. The device is small and
Autowatch Ghost Immobiliser Fitting weatherproof, which means it's difficult to detect and even harder to tamper with.
The ghost immobiliser has another benefit: it can be inserted into your vehicle without leaving any permanent marks. This makes it perfect for those who are planning to sell their vehicle in the near future. It's also quicker and simpler to install than the factory-installed system.
The Autowatch Ghost is a groundbreaking next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to create a unique PIN code. This is a stealthy system that can be installed without severing any wires, and does not require additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from gaining access by using an additional key or replacing the ECU with the use of a "relay". This system is TASSA certified and is connected to an International Security Register, allowing owners to have peace of mind knowing their vehicles are secure from theft.
No scanning with RF
You'll want to secure your vehicle from theft if have spent a lot of money and spent a lot of time customizing it. One way to do this is to install an immobiliser. It will stop the engine from starting until you enter a unique PIN code. You can create a 20-digit pin using the buttons on your dashboard and the steering wheel. This will ensure that only you have the right to drive your car. You can also set up a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This will permit your technician to work on your car without you being there. This feature is great for those who wish to cut down on time and simplify their lives.
Ghost immobilisers are new generation device that connects to your vehicles CAN data network, and uses the buttons on the steering wheel and dashboard to program a unique PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any noise or LED indicators. It can be placed anywhere on your vehicle without altering the look of the vehicle.
This stealthy system is approved by TASSA and can lower the cost of insurance. It also comes with an ability to track your vehicle that can track your vehicle even if it has been stolen. This is especially useful if you own a rare expensive vehicle which you've invested many hours customizing.
Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle when you've lost your PIN or are not able to enter your vehicle. This feature is perfect for when you have to pick up the kids or run errands but don't want to put yourself at risk by letting someone else driving your vehicle. This feature is helpful when you need to take your vehicle in for repair or service.
Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves who use RF scanning or code technology to capture codes. It also has the ability to protect your car against key copying and ECU swapping, which are typical methods of theft from cars.
There is no key to cloning
Ghost immobilisers are a great way to protect expensive cars and stop key copying. They prevent your car from being started unless a PIN code is entered in conjunction with the standard key fob. This makes it extremely difficult for thieves to rob your vehicle and can also deter them from doing it initially. This is an especially good idea if you've spent an enormous amount of time and money in customizing your vehicle or own a unique or expensive model.
These immobilisers are connected to the vehicle's CAN network and are completely hidden, meaning that their presence is not evident. It is also difficult to identify by using radio frequency scanning technology or code grabbing. This means that a thief will have to spend longer in order to successfully steal your car.
To bypass the system,
autowatch Ghost immobiliser fitting a thief must be aware of the unique pin code and the location of the Ghost. But, the pin code is unique to you and may be altered as many times as you'd like. The pin code you choose is easy to remember however, it is mathematically impossible for anyone else to decipher. In addition, the engineer will provide you with a backup PIN code override in case you forget the pin.
The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and is completely customizable to match the style of your vehicle. It is also easy to use and affordable. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, as long as the new vehicle is compatible with the.
The CAN bus is compatible with other security features. It can, for example, detect damage to the vehicle and notify the owner. It will also shut off the engine in the event that the car has been tampered with. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. In addition, it can alert the owner if the vehicle has been moved.
No OBD port hacking
ghost 2 immobiliser cost employs an immobiliser that is hidden and connected to your vehicle's CAN data network that prevents thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob, and then code new keys. This technology is a step up over the old methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or changing your battery.
The autowatch
ghost immobiliser 2 immobiliser fitting,
explanation, Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking, and replica car theft. It doesn't use LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.
Modern thieves can utilize diagnostics to identify circuit breakages in your vehicle. They can bypass immobilisers that require a lot of wiring or are integrated in the wiring. The Ghost is weatherproof and does not require any additional wiring.
