UPVC Window Handle ReplacementReplacing a damaged window handle is a relatively simple process and with the right tools it can be done quickly. However, it is essential to know your type of handle and its spindle length before buying a replacement.
Older uPVC window handles have a spur which extends and is locked over the cockspur wedge striker. These can be right-handed or left-handed and should be matched when replacing.
What type of lock and handle do I need?
There are a variety of windows locks and handles made of upvc each with their particular advantages and uses. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism functions according to the plan. With time and regular use the handles made of upvc on your windows could be damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. It is important to repair your upvc window handles immediately if you see them falling off. This will help avoid burglaries and ensure your home is secure.
It's a simple job that virtually anyone can perform. With just a few tools and the proper knowledge it's a straightforward procedure that should take no longer than a couple of minutes. You must know the kind of handle or lock that you have on your window. This will help you select the right replacement.
Inline Espagnolette Handles
They are typically found on the outside of the window. They have a flat design and come with a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also come with spindles that run through the center of the handle and then into the window frame to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames. They have a distinctive, hook-shaped design. Cockspur handles are fitted with a single screw that holds the handle to the frame and aren't as secure as other kinds of window handles.
Tilt and Turn Handles
The tilt and turn handles are different from other handles made of upvc in that they can be rotated to open the window and then tilted to the window to let air circulate. They feature a 7mm spindle in the back and are available both in left and right-handed versions.
When buying
replacement handles for upvc windows upvc handles it is essential to verify the length of the spindle since not all of them are the same size. To test the length of your upvc handle simply drop something into the middle of the hole and measure how far it extends before it reaches an obstruction. This is the maximum spindle size that will fit into your windows.
What is the spindle?
uPVC window handles function similarly like doors, turning the handle to operate a latch inside the frame. This unlocks the window so it can be opened and closed. These handles can be damaged, especially if they're used frequently or exposed to harsh environments. It is possible to replace the handles on your uPVC window if they are not functioning correctly.
There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. This is why it is important to know the type of handle you have installed on your uPVC window to find the right replacement.
You can check what type of uPVC handle you are using by looking at the base section of the handle. There should be a'snap in cover' over one screw that holds the handle base in the correct position. Once you remove this you will be able to see the screw that holds the handle base in place. Once both screws have been removed, you should be able pull the handle from the uPVC.
After you have removed the uPVC window handle you need to remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement of the same length as the original handle and the locking device.
The spindle wears out and cannot operate the locking mechanism. This can be caused by corrosion, damage caused by continuous use, or even a loosening locking mechanism. When this happens it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.
How do I get rid of my old handle?
Window handles can become damaged or even broken over the course of time. It is crucial to fix them as quickly a possible to ensure your safety. The good news is that replacing a damaged or worn handle is a relatively simple job that can be completed in less than one minute and doesn't require any special tools.
The first step to remove the old handle is to remove the screw that is located on the top of the base of the handle. Once the screw is removed, the handle can then be removed from the base section. There will be a second screw that is located at the bottom of the handle's base, and it can be removed as well. After the two screws are removed, the handle will be detached from the base of the window.
After the handle has been removed, you can take the new handle and align the fixing holes with the holes currently in the window frame. If there is a cap or
UPVC Window Handle Replacement sticker on the new handle remove it if needed and screw the handle in place. Once the handle is in place,
UPVC Window Handle Replacement it is important to test that it works by turning the handle and ensuring that the lock mechanism activates.
Espag handles have a spindle which protrudes from the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom bar crossmember.
Once you have the new handle in place, you can insert the spindle inside the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle is fixed. Now that the handle is in use, open and close the window a few times to make sure that it functions correctly and securely.
How do I install the new handle?
It's not that difficult to change the handle on your Upvc windows. The process is very simple. You only need a screwdriver, and a little bit of patience. The first thing you need to do is make sure that the handle you have previously used is locked and then take out any screws that are visible. you can replace them with screw caps if required. After you have removed the handle, you'll need to record the length of the spindle that extends from the back. This is crucial as it will determine the type of handle you'll need to purchase.
Espagnolette handles are the most popular type of handle used on uPVC windows. The spindle is inserted into the handle to operate the locking mechanism inside the window frame. When the handle is turned it opens the latch on the window, allowing it to open. As time passes and with regular use, espagnolette handles can be damaged or destroyed, making it necessary to locate replacements.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are more secure than the espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles, however you should ensure that the new handle has a curved blade as opposed to flat ones.
Once you have decided on the right handle to purchase, you can simply line up the new handle to the existing screw holes and then screw it into the appropriate position. Then, you should put the screw covers on and test your new handle.
