Why You Need a
Ghost 2 Immobiliser Fitting Near MeModern day thieves can take vehicles in less than a minute. They make use of the car's OBD port to hack the ECU & then duplicate a new key, all from a hidden laptop in the car.
The Autowatch Ghost immobiliser can prevent this by sending pin codes to buttons on your vehicle (steering wheels & central console). It is completely unnoticeable to anyone in your car.
There are no key fobs or LED indicators, or any other methods to locate the vehicle are in place.
The ghost immobiliser is the best way to prevent keyless entry theft and key cloning. This device is designed to safeguard your vehicle against these types of attacks, by preventing the engine after a proper pin code is entered. This is a very efficient method of safeguarding your car, and even insurance companies see it as a precautionary measure that can reduce the cost of your insurance.
The way that the ghost operates is through connecting to your vehicle's CAN data network. Once installed by us at Car Theft Solutions it will only begin when you press a specific button sequence using your unique override code. This means that any attempt to start the vehicle without entering this code will be greeted with a loud siren, and the engine won't start. The thief will then realise that they have been caught and
ghost 2 immobiliser fitting Near Me are likely to get out of the vehicle and flee.
One of the big advantages of this system is that it doesn't transmit any signals like a tracker, this means that thieves cannot use RF signal receivers to locate your Ghost device. It doesn't emit IR (infrared signals) as do typical remote control key fobs and trackers, making it hard to hack or evade.
The Ghost also has valet-mode which can be activated when you are handing your vehicle over to an individual for parking or service. This will turn off the immobiliser CAN for 30mph, and allows you to operate the vehicle as normal with your key fob or phone app. When the vehicle is parked up again, the Ghost will regain full functionality.
If you would like to learn more about the ghost or would like us to install it in your vehicle then contact us at Car Theft Solutions today. We are a dedicated family owned business with more than 10 years of experience in security for vehicles including the Ghost immobiliser fitting. We are a Thatcham-approved installer for Ghost products and our reputation is built on customer satisfaction.
No cloning or hacking
The Autowatch
ghost ii immobiliser immobiliser is one of the most advanced models on the market. It protects your vehicle from hacking and key cloning and makes it virtually impossible to steal. The only way a thief could steal your vehicle is by physically towing it away, and even then they won't be in a position to start the engine.
This is because unlike other immobilisers that only stop your vehicle from starting if you don't have a fob, the Ghost's clever system actually cuts off the engine control unit to prevent the vehicle from starting. The system transmits an alert via buttons on the steering wheel, door panel or the centre console. It is only disarmed with the correct pin code configuration.
Its discreet and sleek design ensures that it will fit in seamlessly into your vehicle, with no additional keys or LED indicators - it runs independently from your factory alarm or tracker. It is a CAN-bus immobiliser, meaning that it is part of your vehicle's control network and does no interfere with existing devices such as the key fob in your vehicle or alarm.
This unique technology is not detectable by thieves, unlike other systems that employ codes grabbing and RF scanning. It simply sends a series of pin codes silently through the buttons on your car's steering wheel doors, door panels or central console. The Ghost is a revolutionary product that protects your vehicle from theft of keyless entry and smart key theft. It does this by creating an individual pin code that must be entered in order to disable the device.
With the increasing number of keyless entry cars that are on the road The thieves are becoming sophisticated and using cloning equipment that can be bought online or through the classifieds for less than PS15. The cloned key fob could be used to gain access to the vehicle. A standard immobiliser for vehicles only stops the engine from starting if they have your original key fob, this does not provide enough protection and it is easy for criminals to steal or jam signals to gain access to the vehicle.
Valet mode
An immobiliser that is standard on your vehicle has an electronic chip that sends the signal when you press your key fob button, the system will then search for that specific code that was sent from the key to start the vehicle. If the signal is not able to be detected the system will shut off power and prevent the vehicle from starting. This is the basic principle behind all immobilisers that are sold on the market and is a vital security measure to ensure that your vehicle isn't stolen even if a burglar has your keys or a device that can increase the signal from your key fob.
But a ghost immobiliser doesn't just stop it however, it goes far beyond that. The system, which is located on the CAN bus of your Mercedes, is programmed with a unique PIN that needs to be entered in order to start the vehicle. The app is then locked your app and no one can ever access it unless they have the same unique pin that you have.
The system will also stop cloning, signal jamming and hacking (which thieves may employ to bypass the immobiliser on your vehicle). This means that if a thief does manage to get your car keys or your key fob, they won't be capable of starting your car even if they're just only a few feet of it. The only way for them to get your car away would be to physically take it away in a flatbed lorry which is extremely unlikely.
Valet mode comes as an option with your ghost immobiliser. When it is activated the glove box of your car and trunk will be locked so that anyone who steals your car will not have any personal items to carry with them. It also limits the speed of your Tesla so that it is unable to be driven at speeds of more than 70mph and will disable ludicrous mode. It will also lock your driver profiles and conceal your home and work addresses to ensure that no one other person can access the private information on your Tesla dashboard.
If you wish to make use of your car for valet parking or service reasons, simply choose the 'Valet/Service' option in the dashboard app and enter your 4-digit valet pin on the touchscreen. After you've done this, the alarm functions will be bypassed however it will hinder the ability to start your car without a valid pin entered. This is perfect for people who have to hand their vehicle to other people for repair, such as taxi drivers or garage mechanics.
The first aftermarket CAN-bus immobiliser on the world
The Autowatch
ghost 2 immobiliser fitting near me is the world's first aftermarket CAN bus immobiliser. It offers security that is unparalleled by anything available today. It guards against key cloning and hacking and even theft of keys. This is accomplished through a partnership with your vehicle's current interface. It does not require additional remotes or fobs, but instead integrates into your vehicle's CAN data network. This makes it a "stealth device.
The device is a circuit board buried inside your car's engine control unit (ECU). It functions quietly. When activated, it stops your vehicle from starting until specific PIN is entered. This is a unique number that you will be given when you make an appointment for installation. This number is needed to activate valet mode, turn off the alarm or allow you to leave in the car of a friend (if they have Ghost installed). Ghost installed too).
