Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your valuable property from theft. This system is discreet & doesn't require additional key fobs in order to operate.
The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will allow your vehicle to begin.
Simple change of PIN code
Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system may assist you in locating your car in the event of theft, it does not prevent the crime from happening in the first instance. An immobiliser, on the other hand, does exactly what it says on the tin: it disables the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your car.
The ghost device makes use of the buttons on your car to generate a unique sequence that must be entered to allow the engine to start. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This is an excellent option when you wish to donate your car to valet parking or servicing. The immobiliser will stay in operation.
The Ghost is a very unique and ingenious device that is used in conjunction with the buttons of your car rather than being a standalone unit. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.
Small, weatherproof device
The Autowatch ghost immobiliser is a high-tech security system that protects your vehicle from key cloning, hacking and ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices, which are a common technique used by thieves to bypass immobilisers.
The advantage of using CAN data is that it operates silently compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be detected by traditional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons in your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended by up to 20 presses for extra security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.
The Ghost stops car thieves from adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It is possible to operate temporarily in valet or service mode (with parameters set such as 30mph speed limit) which means you can offer your vehicle to a valet or service without needing to enter the code.
Each vehicle is tested
The
autowatch Ghost installers west midlands -
gonzales-coates.blogbright.net - Ghost is the world's first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals that block the system of your vehicle from performing its normal startup routine until you input the passcode you have created. The system can be turned off or on via your smartphone's app without the need for additional wires.
The standard factory immobilisers work by using a transponder, which is integrated into the key. It transmits a message to the ECU. If the correct code is sent, the car will start, but if a transponder is swapped with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be stolen and then started. A South African company that is at the forefront of car security systems technology developed the Ghost immobiliser. It shields your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away from thieves could they take it away, and they would still not be able to drive it.
Ghost makes use of buttons in your vehicle, including the indicator stalk, the steering wheel, and doors,
how to install a ghost immobiliser generate unique PIN codes that must be entered to use your car. This is performed without the need for additional hardware, such as a key-fob and can be up to 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.
Ghost is more difficult to remove than car alarms, which require disarming by pressing the buttons. This makes it a great alternative to a GPS tracker, which can help locate your car after it has been stolen.
Emergency PIN code override
You do not have to look long on social media sites to find stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning devices as well as hacking tools that allow thieves to start the vehicle with your original keys.
Our Ghost immobiliser is designed to combat this and offer an extra layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating a unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the center console. The unique pin code must be entered together with your original key fob in order to stop the vehicle from starting. The unique override pin can be located on a black card that you receive following the installation. It is simple to remember because there aren't any LED indicators.
The device is hidden within the vehicle's wires, and doesn't emit any radio signals, which means it isn't able to be recognized by thieves with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to an alarm.
Contrary to other security systems which use a relay in engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.
These systems can also be connected to a separate alarm, immobiliser or tracker. This should be decided prior to the installation. They also work with service/valet modes and is a great alternative to a tracking device if you take your car to the dealer to address an electrical problem.
Service/Valet Mode
In recent times, there has been an increase in vehicles being stolen without the owners keys. It is easier than ever to steal your pride and joy with the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been copied.
It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it does not use radio frequencies or key fobs. This means it isn't detected by diagnostics or any other car hacking devices.
